A Built-In Cupboard Photo Design

It's not only ideally flat ceilings, walls and niche. Hippocartone scarfs are a great solution for a small room or kitchen. Unlimited design opportunities, coupled with relative cheapness, are the main advantages of this material. You can save on the purchase of carcasing furniture and make the interior inexorable.

The manufacture of boilers from hypercoton will require basic skills in handling this material, metal profile and fortressing elements, caps, grounding, paint for finishing.

If you don't know what your future hipposcoartone closet looks like, the Internet photos can be the beginning of your fantasy. You can make a angular, linear or built-in closet It's from the hippocartone, as well as the closet from the hippocartone. The material allows for the design of furniture that fits well into any premises. Measuring the room, and more accurately, the place where you plan to install the closet, draw his pattern with all the sizes. Pay attention to the distribution of the loads on the surface of the hipposcoartone. If it's a big shelf for big things, you'll have to look at the cross-sectional designs.

Typically, the hipsocarton is attached to the ceiling or wall. If they manufacture a cabinet with their hands, they usually use all available heights. Therefore, the surface of the walls and ceilings should be prepared first to secure the cells cut out of the GCL. The heading line is attached to the walls and ceilings with inches. If the surface of the wall is not stoned and the wooden surface can be used for the fixing. The suspensions shall then be located 500 mm apart. They have a vertical effluent profile. The horizontal elements of the carcasus provide additional rigidity to the whole structure. They are connected to the profiling by the special attachments that the people call crabs. At the stage of the carcasing device, the profile for the shelves, the boxes, if you think they'll be hyposocartonic, too.

A special amortizing ribbon shall be attached to the section areas on the floor. It's necessary for vibrations from the floor not to be transmitted to the building blocks of the closet.